Discovered that some 5050 RGB LED strips I had lying around fit PERFECTLY into the slot of these T-Slot extrusions I had collecting dust. Rigged together a DC wall-wart power supply to a switch, then to the LEDs, and fit it all together with some 3D printed caps.
Be afraid of the dark… very afraid…
Especially if you’re operating heavy machinery
Underside view of LED strip
Underside in dark
3D printed endcaps and switch housing to route wires to the DC power supply. Say hello!
Connections between T-slot extrusions are internal and tightened by tension, reducing the amount of machining I had to do for this project, and doing away with ugly bolts from being visible.
Quick Mini-Lathe LED Lamp
So, I’ve been receiving a lot of complaints recently that the lighting in the student project lab I run isn’t the greatest for machining. To appease the masses, I put together a quick LED lamp for the lathe using some spare parts I had lying around, and some convenient 3D printing magic. This was put together over a Saturday with some jazz to groove me through the day~
Role |
Creator |
For |
UCLA ASME |
Date |
2/27/2016 |