Stripping the compromised stock case for parts and dimensions

What the stock case looks like when stripped to its bones.

Reference drawings/ dimensions for the camera and recycled parts. I have decided to reuse the buttons and the lens on the stock case and build around that.

One of the hardest designs were the lens mounting, in order to keep it tough, waterproof, but safe to not damage the glass lens. I designed a 5 piece system, with structural pieces milled out of aluminum, and the rubber gaskets custom printed to size with the Objet Connex 3D Polyjet printer.

Mounting Bracket system design

First complete concept design sketches.

2AM 3D modelling process begins…using Autodesk Inventor

A underside perspective view of the complete 3D model design

Exploded view of all the design assembly

Rapid 1st prototype with FDM 3D printing. This was the first part printed ever on one of Pier 9's new Fortus450mc 3D printer!

FDM printing is ideal for rapid prototyping that requires moderately tight tolerances and for high toughness. It gets the job done, and gives you a hard copy of your part to make adjustments there on.

Comparison to the stock case.

With a few changes to the parts after analyzing the FDM prototype, time for a better presentation prototype using polyjet printing on the Stratasys Objet 350! Polyjet printing is uses a resin that costs significantly more than spools of ABS and doesn’t have quite the same toughness, but the surface quality and tolerances are quite unbeatable.

Bezel, back cover, and main body off the printer and post wash cycle.

If she fits, she sits…

And the bezel goes on beautifully as well!

Now imagine this, but metal… We’re getting there.

Prototype Mk2 sitting in the Mori Seiki after all fasteners tied in. Looking good!

Baby got back. Lots of bolts on her back at least…

Preliminary prototype made on the Haas VF2SS CNC mill to check fit and tolerances of key features.
CAM programming credit to my buddy Pipp back at Autodesk.

Two years later, Autodesk has featured my case design at their Pier 9 workshop, using it as a CNC training part for new workshop users.

CNC Proof Go Pro Case

This is a rather “meta” project, where it is intended for CNC machines, but is built by one as well.
I worked as a CNC operator/ machinist, and wanted to setup a GoPro inside the machines to record some of the awesome metal cutting action. However, we eventually noticed that the coolant running in the machine degraded the polycarbonate casing of the GoPro, causing it to yield at localized stress points. This pretty much made the waterproofing of the cases useless, so I set out to design a metal GoPro case that was rugged and industrial, which could handle the conditions within the machines.
The process shows the reverse engineering of a standard go pro case to design the new one.

Role
Designer, Fabricator
For
Autodesk